INstallation guide

  • Installing a car wiper is easy! Follow these simple steps:
  • 1. Clean the glass with the oil film remover.
  • 2. Remove the old wiper blade by pressing the tab or lever and gently pulling it off.
  • 3. Unpack the new wiper blade.
  • 4. Attach the New Look Coating Wiper by aligning it with the wiper arm and clicking it into place.
  • 5. Activate the coating wiper by turning on the wiper and swipe on the dry surface for 5-10 minutes.
  • 6. Test the wiper blade to ensure smooth operation.
  • That's it! Enjoy clear visibility on the road. Remember to replace wiper blades when necessary for optimal performance.

Installation Guide for different model of wiper arm

M1 Wiper Arm (U Hook Wiper Arm)
M2 Wiper Arm (Side Pin Wiper Arm)
M3 Wiper Arm (Push Button Wiper Arm)
M4 Wiper Arm (Push Button Wiper Arm)
M5 Wiper Arm
M6 Wiper Arm (Pinch Tab Wiper Arm)
M7 Wiper Arm (Side Clip Wiper Arm)
M8 Wiper Arm (Bayonet Wiper Arm)
M9 Wiper Arm (Push Button Wiper Arm)
M13 Wiper Arm

Operation Method

3-8

1

Move the wipers on the dried windshield for 5 - 10 minutes, ensuring both the windshield and the wipers are dry.
1-8

2

The water-repellent film is formed and will continue to form as the wipers are used.